คะแนนจากผู้ซื้อ

ชุดเครื่องดูดตะกั่ว FR410-55 | HFR410-55 | HAKKO FR-410 (220V) | พร้อมกล่องอุปกรณ์ | ของแท้100%
มาเป็นคนแรกที่รีวิวพรีเมี่ยมสินค้านี้
รายละเอียดครบ
(รอ)
ตรงกับหน้าเว็บ
(รอ)
ราคาคุ้มค่า
(รอ)
คุณภาพสินค้า
(รอ)
★ ทางร้านสามารถออกบิล VAT ได้ ★
เงื่อนไข
✔️ก่อนสั่งซื้อสินค้า กรุณาแจ้งแอดมินหรือติดต่อผู้ขายก่อนทุกครั้ง
✔️ กรอกข้อมูลให้ ที่อยู่ เลขที่ผู้เสียภาษี
(หากข้อมูลไม่ถูกต้อง ให้แจ้งภายในเดือนเท่านั้น)
**ในกรณีการออกใบกำกับภาษี ถ้าคุณลูกค้าไม่ได้แจ้งล่วงหน้า ทางร้านจะไม่ออกใบกำกับภาษีย้อนหลังให้นะครับ**
ข้อมูล
น้ำหนัก
บาร์โค้ด
ลงสินค้า
อัพเดทล่าสุด
รายละเอียดสินค้า
POINT
  • - Desoldering tool with built-in vacuum pump
  • - 140 W high power enables perfect desoldering on multi-layer PWB
  • - New type nozzle can fit onto micro land patterns and narrow space
  • - New functions allow the improvement of maintainability and reliable desoldering


Specifications

Model No. FR-410(Desoldering tool: FR-4103)
Power consumption 190 W
Temperature range 330 to 450℃
Temperature stability ±5℃ at idle temperature

 

Station

Output voltage AC 24 V
Vacuum generator Vacuum pump, double cylinder type
Vacuum pressure Max. 80 kPa (600 mmHg)
Suction flow 15 L/min.
Dimensions 165 (W) × 137 (H) × 244 (D) mm
Weight 4.8 kg

 

Desoldering Tool

Power consumption 140 W (24 V)
Nozzle to ground resistance <2 Ω
Nozzle to ground potential <2 mV
Heating element Composite heater
Standard nozzle 1.0 mm dia. S type (No. N61-05)
Cord length 1.2 m
Total length 168 mm (with N61-05 nozzle)
Weight 190 g (with N61-05 nozzle)

 

  • The suction flow is measured at the filter case suction port of station.
  • Total length and weight are measured without cord and hose.

Soldering Tip/Nozzle

N61 Series

SS type

  •  Nozzle

    N61-01 Nozzle

    0.6mm dia.

     

  •  Nozzle

    N61-02 Nozzle

    0.8mm dia.

     

  •  Nozzle

    N61-03 Nozzle

    1.0mm dia.

     

S type

  •  Nozzle

    N61-04 Nozzle

    0.8mm dia.

     

  •  Nozzle

    N61-05 Nozzle

    1.0mm dia.

     

  •  Nozzle

    N61-06 Nozzle

    1.3mm dia.

     

Standard type

  •  Nozzle

    N61-07 Nozzle

    0.8mm dia.

     

  •  Nozzle

    N61-08 Nozzle

    1.0mm dia.

     

  •  Nozzle

    N61-09 Nozzle

    1.3mm dia.

     

  •  Nozzle

    N61-10 Nozzle

    1.6mm dia.

     

Long type

  •  Nozzle

    N61-11 Nozzle

    0.8mm dia.

     

  •  Nozzle

    N61-12 Nozzle

    1.0mm dia.

     

  •  Nozzle

    N61-13 Nozzle

    1.3mm dia.

     

  •  Nozzle

    N61-14 Nozzle

    1.6mm dia.

     

Oval type

  •  Nozzle

    N61-15 Nozzle

    3mm x 1mm

     

  •  Nozzle

    N61-16 Nozzle

    4mm x 1mm

  •  




Packing List

Model No. Packing List
FR-410(w/FR-4103) FR-410(w/FR-4103)
  • Station
  • Handpiece (FR-4103)
  • Iron holder (FH-410, with cleaning wire)
  • Tool box (Cleaning pin for 1.0 mm dia., Cleaning pin for heater, Cleaning drill for 1.0 mm dia., Nozzle wrench, Filter [qty2], Ceramic paper filter [qty 4])
  • Power cord
  • Instruction manual

Replacement Parts

  Part No. Name Specifications
images:FR4103-81 Desoldering tool FR-4103 FR4103-81 Desoldering tool FR-4103 With 1.0mm dia. S nozzle, 140W(24V)
 
* Replacement for FR4101-81
images:A5055 Heating element A5055 Heating element 140W(24V)
 
For FR-4103
images:B5222 Enclosure pipe B5222 Enclosure pipe
 
For FR-4103
images:A5020 Filter A5020 Filter Qty: 10
 
images:B5185 Filter pipe assembly B5185 Filter pipe assembly With ceramic paper filter and related parts
 
* Replacement for B5105
images:B5105 Filter pipe assembly B5105 Filter pipe assembly With ceramic paper filter and related parts
 
* Discontinued/The replacement is "B5185".
images:A5044 Ceramic paper filter-L A5044 Ceramic paper filter-L Qty: 10
 
* Replacement for A1033
images:A1033 Ceramic paper filter-L A1033 Ceramic paper filter-L Qty: 10
 
* Discontinued/The replacement is "A5044".
images:B5104 Pre-filter B5104 Pre-filter
 
 
images:A5030 Front holder A5030 Front holder
 
 
images:A5031 Filter holder A5031 Filter holder
 
 
images:B5194 Filter pipe B5194 Filter pipe
 
 
images:A1013 Diaphragm A1013 Diaphragm Qty: 2
 
images:A1014 Valve plate A1014 Valve plate Qty: 2
 
images:C5030 Tool box C5030 Tool box
 
 
images:B1087 Cleaning pin B1087 Cleaning pin
 
For 1.0mm dia. nozzle
images:B1215 Cleaning pin B1215 Cleaning pin
 
For heating element
images:B1303 Cleaning drill B1303 Cleaning drill
 
For 1.0mm dia. nozzle
images:B1306 Drill holder B1306 Drill holder
 
For 0.8mm/1.0mm dia. nozzle
images:B1309 Drill B1309 Drill Qty:10
 
For 1.0mm dia. nozzle
images:B5106 Nozzle wrench B5106 Nozzle wrench
 
 
images:599-029 Cleaning wire 599-029 Cleaning wire
 
 
images:FH410-82 Iron holder FH410-82 Iron holder With cleaning wire
 
For FR-4101(Discontinued) and FR-4103




Option

  Part No. Name Specifications
images:C5046 Nozzle quick changer C5046 Nozzle quick changer
 
For FR-4103 & FR-301
images:B5228 Receptacle B5228 Receptacle
 
For C5046
images:B5230 Oval nozzle positioning jig B5230 Oval nozzle positioning jig
 
For FR-4103
images:FH410-81 Iron holder FH410-81 Iron holder With cleaning sponge
 
For FR-4101(Discontinued) and FR-4103
images:A1519 Cleaning sponge A1519 Cleaning sponge Yellow
 
* Replacement for A1536
For 633, 635, FH-100, FH-400, FH-410
images:B2874 Cleaning pin B2874 Cleaning pin
 
For 0.6mm dia. nozzle
images:B1086 Cleaning pin B1086 Cleaning pin
 
For 0.8mm dia. nozzle
images:B1088 Cleaning pin B1088 Cleaning pin
 
For 1.3mm dia. nozzle
images:B1089 Cleaning pin B1089 Cleaning pin
 
For 1.6mm dia. nozzle
images:B5141 Cleaning drill B5141 Cleaning drill
 
For 0.6mm dia. nozzle
images:B1302 Cleaning drill B1302 Cleaning drill
 
For 0.8mm dia. nozzle
images:B1304 Cleaning drill B1304 Cleaning drill
 
For 1.3mm dia. nozzle
images:B1305 Cleaning drill B1305 Cleaning drill
 
For 1.6mm dia. nozzle
images:B5142 Drill holder B5142 Drill holder
 
For 0.6mm dia. nozzle
images:B1307 Drill holder B1307 Drill holder
 
For 1.3mm/1.6mm dia. nozzle
images:B5143 Drill B5143 Drill Qty:10
 
For 0.6mm dia. nozzle
images:B1308 Drill B1308 Drill Qty:10
 
For 0.8mm dia. nozzle
images:B1310 Drill B1310 Drill Qty:10
 
For 1.3mm dia. nozzle
images:B1311 Drill B1311 Drill Qty: 10
 
For 1.6mm dia. nozzle


A wide selection of nozzle, with the addition of new types, is available for a variety of desoldering works.

Applicable to even micro lands, components in a narrow space or flat type terminals on the PWB of downsized devices like mobile phone.


140W high powers enable perfect desoldering for the components on multi-layer PWB

Increasing the power to 140W from 50W of our previous models (HAKKO 474・475), it can make it easy to desolder on multi-layer PWB which was never an easy job, and it can also shorten the process time.

Secure Desoldering, valve function that suctions with high pressure

Suction starts 0.2 seconds after pulling the trigger for instance and high pressure suction to achieve complete desoldering.

Secure Desoldering, valve function that suctions with high pressure

Reduction of solder clogging

Improved heating ability and ACF* ensure suctioned solder be carried to filter pipe and reduce solder clogging.

  • ACF (Anti Clogging Function) is a function to keep pump running for a certain number of seconds after releasing trigger.

Reduction of solder clogging

Selecting the right nozzle for your workpiece is very important for quality of desoldering !

It is important to heat a land of PWB and a component lead with a nozzle at the same time when desoldering.
Selection of the right nozzle shape is critical to ensuring the quality of work. Inappropriate nozzles can decrease work efficiency and damage PWB.

Selecting the right nozzle for your workpiece is very important for quality of desoldering !

The nozzle lineup for FR-410 covers a variety of desoldering works, such as micro lands, components in a narro space, and flat type terminals.

FR-410

Quick nozzle replacement with special tool

Nozzle Quick Changer compatible handle (FR-4103) enables one-action nozzle replacement

Quick nozzle replacement with special tool

Option

Improvement in maintainability

Easy heater replacement

Remove 3 screws to replace heating element

Easy heater replacement

Tool box for maintenance kit

A tool box that contains of maintenance tools such as cleaning pins for nozzle and heating core is provided for standard. The box can be set on the top of the unit for the convenience of use.

Tool box for maintenance kit

New filter pipe

Easy to clean inside the pipe, due to larger size comparing the previous model.

Larger filer and more transparency

Filter size has been increased to protect the pump from contaminants, and transparent filter cover allows quick visual check of the filter condition.

Larger filer and more transparency

เงื่อนไขอื่นๆ
Tags

ช้อปปิ้งได้อย่างมั่นใจ ปลอดภัยทุกการชำระเงิน

มั่นใจได้ทันทีเมื่อคุณช้อปผ่าน

ก้าวสู่ยุคใหม่แห่งการช้อปปิ้งออนไลน์อย่างปลอดภัย ด้วยระบบรับชำระเงิน LnwPay ที่เป็นตัวกลางแทนร้านค้า ทำให้เราสามารถคุ้มครองและป้องกันการทุจริตฉ้อโกงได้ทั้งผู้ซื้อและผู้ขาย

ทำไม LnwPay ถึงปลอดภัย
ดูรายละเอียดเพิ่มเติม

วิธีการสั่งซื้อสินค้า

Step 1: ช้อปปิ้งอย่างมั่นใจกับร้านค้าที่มีสัญลักษณ์ LnwPay

ขั้นตอนที่ 1

ช้อปปิ้งอย่างมั่นใจ กับร้านค้าที่มีสัญลักษณ์ LnwPay

Step 2: ชำระเงินง่ายๆ หลากหลายช่องทาง ไม่ว่าจะโอนเงิน ชำระออนไลน์

ขั้นตอนที่ 2

ชำระเงินง่ายๆ หลากหลายช่องทาง
ไม่ว่าจะโอนเงินหรือชำระออนไลน์

Step 3: รอแป๊บเดียว เดี๋ยวของก็มาชัวร์ถ้ามีปัญหา ติดต่อเราขอคืนเงิน

ขั้นตอนที่ 3

รอแป๊บเดียว เดี๋ยวของก็มาชัวร์ ถ้ามีปัญหา ติดต่อเราขอคืนเงิน

พิเศษ รับคะแนนสะสม LnwPoints คืนทันที
เพียงกลับมารีวิวการสั่งซื้อของคุณที่ LnwPay รับคะแนนคืนทันที สามารถนำไปใช้เป็นส่วนลดในการสั่งซื้อกับร้านค้าที่มีสัญลักษณ์ LnwPay ในครั้งต่อไป คะแนนสะสม LnwPoints คืออะไร
ขณะนี้ร้านค้าเปลี่ยนมาใช้ระบบรับชำระเงินผ่าน LnwPay กรุณาตรวจสอบข้อมูลวิธีการชำระเงินใหม่อีกครั้ง รายละเอียดเพิ่มเติม

ช่องทางชำระเงินระบบรับชำระเงิน LnwPay

ติดต่อ / สอบถาม

**กรุณาเลือกช่องทางติดต่อตามข้อสงสัยของคุณ ในกรณีที่คุณไม่สามารถติดต่อเจ้าของร้านได้ สามารถติดต่อมายังทีมงาน LnwPay แล้วเราจะช่วยเหลือคุณจนถึงที่สุด

ติดต่อเจ้าของร้าน

เรื่องที่ติดต่อผ่านร้านค้า

  • รายละเอียดสินค้า
  • สต๊อกสินค้า
  • ระยะเวลาการจัดส่ง
saleonline@srt.co.th
ติดต่อ

เรื่องที่ติดต่อผ่าน

  • วิธีการสั่งซื้อสินค้า
  • ชำระเงิน
  • แจ้งปัญหา
support@LnwPay.com
มาเป็นคนแรกที่รีวิวพรีเมี่ยมสินค้านี้
มาเป็นคนแรกที่รีวิวพรีเมี่ยมสินค้านี้ให้คนอื่นรับรู้ แถมรับคะแนนสะสม LnwPoints ใช้เป็นส่วนลดในการสั่งซื้อครั้งต่อไป
รายการสั่งซื้อของฉัน
รายการสั่งซื้อของฉัน
ข้อมูลร้านค้านี้
ร้านSaharoongroj
Saharoongroj
บริษัท สหรุ่งโรจน์ (ประเทศไทย) จำกัด SAHAROONGROJ (THAILAND) CO., LTD. มุ่งเน้น ความซื่อสัตย์ที่จะนำสินค้าสู่มือลูกค้าอย่างมีประสิทธิภาพ ⭐️เปิดให้บริการมาแล้วมากกว่า 60 ปี เป็นตัวแทนจำหน่าย HAKKO รายเดียวในประเทศไทย และจำหน่ายสินค้าอุตสาหกรรมแท้ทุกยี่ห้อ เช่น หัวแร้งบัดกรี Hakko จากญี่ปุ่น. คีม Piergiacomi จากอิตาลี🇮🇹, ท่อหด Woer จากจีน ฯลฯ มีหน้าร้าน สามารถออกใบกำกับภาษีได้ จัดส่งรวดเร็ว ได้ของแน่นอน
เบอร์โทร : 087-826-3443
อีเมล : saleonline@srt.co.th
ส่งข้อความติดต่อร้าน
เกี่ยวกับร้านค้านี้
สินค้าที่ดูล่าสุด
ดูสินค้าทั้งหมดในร้าน
สินค้าที่ดูล่าสุด
บันทึกเป็นร้านโปรด
Join เป็นสมาชิกร้าน
แชร์หน้านี้
แชร์หน้านี้

TOP เลื่อนขึ้นบนสุด

หมวดหมู่

HAKKO [235]

สมาชิก

4 คน พอใจร้านนี้ 100%
บันทึกเป็นร้านโปรด
Join เป็นสมาชิกร้าน
86 คนเป็นสมาชิกร้านนี้
พูดคุย-สอบถาม