Packing List

Model No.	Packing List
FG-100B		Unit 006P 9 V dry battery (for trial) Sensor Instruction manual

Replacement Parts

	Part No.	Name	Specifications
	AS5000	Sensor	Lead-free w/cert conformance

Automatic temperature measurement：AUTO HOLD Function

The measurement will end automatically when tip temperature is stabilized.
The measurement process will be the same no matter who does it.

Constant display of measured max. temperature：MAX HOLD Function

Max measured tip temperature will be displayed.
This function can be useful for quality control of components and P.W.B.

Temperature Sending Function

By infrared communication, FG-100B can send temperature measurement results by AUTO HOLD function or MAX HOLD function to a soldering station (FN-1010, FX-805, FX-971, FX-972) and a soldering pot (FX-305) with an IR receiver.

• Image photo below
  AUTO HOLD function and MAX HOLD function cannot be used at the same time.

Long life sensor AS5000（with certificate of conformance） is equipped as standard

• Possible to measure tip temperature faster with high accuracy
• Approximately 30 times longer than the conventional sensor *Based on our in-house test

• Stable Measurement Accuracy
  While temperature measurement with the conventional sensor tends to degrade after 50 times of measurements, the same level of degradation does not happen until 1,500 times of measurements in case of AS5000.

• Fast installation
  The frame attached to AS5000 makes the sensor installation and removal very easy and fast. Considering the number of measurements, 1 piece of AS5000 (1,500 times/piece) is equivalent to 30 pieces of the conventional sensor (1,500 = 50 times/piece × 30).

[ Conventional Sensor
（191-212）] Approx. 9 sec.

[ New Sensor （AS5000）] Approx. 3 sec.

Temperature Measurement Count Function

Number of tip temperature measurement will be automatically counted.
This function can be useful for control of changing sensor.

Auto Shutoff Function

It will automatically turn the power off if a measured temperature does not exceed 100℃ for 3 minutes.
It saves battery power and time for changing the battery.

Accessible from any direction

• Allows you to measure from any desired direction according to tip shape

• Design image only

Several ways of measurement can be possible with temperature probes. (Option)

• 

  For soldering pot A1310

  

  For hot air station C1541